- Partnership Projects
- Core Competitiveness
- How to Apply
- Our Projects
The project objectives are:
In particular, we first aim to systematically analyse and improve state-of-the-art on-ground multi-carrier pre-distortion techniques. After the technology evaluation and improvement, the selected multi-carrier pre-distortion technique is implemented in a hardware demonstrator capable of generating and receiving four carriers jointly pre-compensated for transmission over a transponder. The gateway emulator and user terminal demonstration setup is tested in a laboratory environment over an RF channel emulator and in live over-the-air satellite tests through the linearized SES’s ASTRA 3B in-orbit transponder.
The main challenges of the project are related to the improvement of existing techniques (that perform poorly for linearized channels) and the implementation of the improved technology providing the most appropriate pre-distortion technique for multi-carrier per transponder operation, and specifically to the implementation of it on a multi-carrier modulator.
The multi-carrier pre-distortion can be used in multi-carrier per transponder use cases with an uplink from a single common gateway. This is a use case that is becoming more and more common in the emerging multi-spot beam HTS systems. Ka-band HTS systems commonly employ wideband transponders, which are accessed from a joint gateway.
An efficient transmission of the multi-carrier per transponder use case is essential to reach the best practical throughput in these systems. In particular, the usage of higher order modulation carriers provides a significant potential gain when a pre-distortion at the transmitter is applied.
The target product that is based on the gateway emulator built in this project is capable of increasing the efficiency of multi-carrier per transponder operation significantly, while remaining compatible with standard DVB-S2 and DVB-S2X receivers. In this specific implementation, a four-carrier per transponder multi-carrier modulator with pre-distortion is build, which is capable of generating significant additional gain in a multi-carrier/transponder operation.
Especially the operation of wideband transponders for HTS use cases is of relevance and is addressed in detail. In this context, a number of practical transmission use cases have been identified which could directly benefit from multi-carrier joint pre-distortion with significant throughput gain improvements.
The overall system concept foresees a common gateway uplink as a basis with the joint transmission of typically 4 carriers per transponder. This transmission scenario is considered in the context of HTS systems, where a multi-carrier per transponder uplink is performed from a single gateway. A fully functional demonstrator transmitting 4 carriers is also implemented and tested in the lab as well as over satellite in the context of this project.
For this demonstrator implementation, different approaches to the pre-distortion of multi-carrier signals are considered. These include data symbol based as well as signal based pre-distortion approaches. Preceding ESA ARTES studies (e.g., APEXX and BEAMSAT) conducted for both approaches showed promising results for non-linear satellite channels. However, the performance over linearized satellite channels was poor. From these different approaches to the multi-carrier pre-distortion, the MCPRED project evaluates and improves the most efficient techniques for the practical usage in a multi-carrier pre-distortion environment considering both data and signal pre-distortion techniques on the transmitter side.
On the reception side, the overall system gain is evaluated in the context of simple and advanced receivers. We implement here a reference receiver based on symbol based equalization as a current reference receiver and evaluate in a second receiver model the possibility to introduce a fractionally spaced equalization (FSE) as well as non-linear post compensation (NLPC) at the reception side as well. The aim is to evaluate the pre-distortion techniques under different receiver models and to evaluate to which extent the pre-distortion gains can be achieved as well with receiver side techniques.
In the following figures, the basic building blocks of the transmitter side and receiver side considered pre-distortion techniques are outlined. The specific building blocks implemented in this project for data and signal based digital pre-distortion (DPD) on the transmitter side as well as nonlinear post compensation (NLPC) and fractionally spaced equalization (FSE) on the receiver side are highlighted in the block diagrams.
A thorough evaluation of the considered pre-distortion and equalization techniques is performed over different transponder models, linearized and non-linearized TWTA models and different IMUX and OMUX filter types. The aim is to evaluate in a comprehensive and practical manner the potential techniques that can be used with a robust manner.
The laboratory validation testbed architecture and setup are illustrated in the figures below:
The field validation testbed architecture and setup are illustrated in the figures below:
In particular, the field validation campaign was successfully conducted at SES’s premises in Betzdorf, Luxembourg, using the linearized SES’s ASTRA 3B in-orbit transponder “3.011” (GEO, 23.5º East, L-TWTA, Ku-band, 36 MHz, FSS) and the RF uplink and downlink ground stations located into the SES’s teleport in Betzdorf, Luxembourg.
The project was kicked-off in February 2015 and successfully completed in November 2017.
During the project execution, the following key milestones were successfully achieved:
The project was successfully completed in November 2017.
In the context of this project, we have proposed and implemented improvements over the state-of-the-art, validated by means of computer simulations, laboratory validation tests over RF channel emulator, and over-the-air live satellite demonstrations over the linearized SES’s ASTRA 3B in-orbit transponder.
For our improvement of the iterative cancellation pre-distortion technique, throughput gains in the order of 9% were demonstrated over satellite over a very linearized transponder, by improving the carrier to distortion ratio, decreasing the input back-off, and increasing the symbol rate while maintaining the occupied bandwidth.
The overlapping of the roll-off of the carriers can be observed from the received spectrum after transmission from the satellite, as illustrated in the figure below.
As an illustration, the figure below provides the Throughput Increase as a function of the Symbol Rate for 32-APSK 5/6 20% roll-off, Inner Carrier, with and without MCPRED.