The IBB is designed to cope with the following main functions:
- To provide conditioned power to the T5 thruster elements.
- To control the power delivered to every element of the system: ON/OFF control, current level settings, etc.
- To externally communicate with a serial line.
The unit is able to control one thrust nevertheless the Beam Supply Module (BSM) is being design with the capability of delivering power to 2 thrusters in case in the future is needed with a different architecture of the system.
In order to implement these functions the unit is built of the following modules:
- Power Conditioning Module & LV Control
- LV Supplies Module
- HV Electronics Module
- Beam Module
The HV Electronics module is enclosed into a Faraday housing (or insulation box) consisting of a two layers box, both layers are insulated each other being the external one referenced to ground and the internal one referenced to the Beam Supply voltage. As all the electronics in this module are also referenced to the Beam voltage this solution allows designing them as if they were conventional electronics from the electrical insulation point of view.
This approach requires high voltage insulation in the different interfaces that link this electronics with the ground referenced ones. Hence, minimising the number of such interfaces is also very important.
The interfaces with the thrusters allow controlling their different elements. In order to reduce the required hardware and taking advantage of the fact that not all the elements within one thruster have to work simultaneously, some supplies are able to perform different functions depending on the element of the thruster to be supplied.
Finally, the unit includes protections against the so called beam event and a specific function to burn away the particles that could get stuck to the grids causing the grids short-circuit.