- Partnership Projects
- Core Competitiveness
- Future Preparation
- Space Solutions
- How to Apply
- Our Projects
The Hybrid Sensor Bus is a modular sensor measurement system for the interrogation of sensors in bus networks on-board satellites. The system is designed for the geostationary reference platform Small-GEO provided by OHB System AG.
The objective of the HSB development is to provide a new system which allows the acquisition of bus-based sensor networks on-board spacecraft. Transducers are used to convert measurands (e.g. temperatures) locally at the respective measurement points. Information of the measurands are transferred via sensor bus networks to the HSB interrogation unit.
Sensors in classical point-to-point (p2p) wiring can be replaced by sensor bus networks with local transducers. Compared to classical sensing topologies the transducer network solution provides benefits like substantial savings in mass and AIT effort.
The fiber-optical interrogation system includes photonic elements which are not available in ESCC compliant versions. Numerous component tests (thermal and radiation) were carried out and the results were considered for the system design.
FBGs suffer from high induced wavelength shifts under radiation due to TID effects. Test series applying a dedicated FBG writing technique were carried out.
FBGs are sensitive both to strain and temperature. A decoupling method in terms of an FBG transducer was introduced.
The processor module shall operate for 15 years allowing later changes in software. For this the processor module is equipped with a special bootloader allowing firmware updates.
Due to the wiring of the sensors in a bus topology the overall mass impact of the sensor harness can be substantially reduced. A reduction of the needed wire length as well as the number of connectors can be achieved.
General advantages of a bus topology in comparison to a point-to-point (p2p) sensor wiring are:
In comparison with p2p connection mass and cabling effort can be saved. AIT of the sensor system is simplified.
Sensors are addressed individually and different sensor types (e.g. temperature, strain, level) can be connected without the need for additional electronics.
The utilization of fiber-optical sensing goes along with additional benefits:
Fiber-optics is insensitive to electromagnetic interferences. No EMC interferences are induced to surrounding equipment. EMC-shielding needs can be reduced.
The HSB System supports the implementation of hybrid sensor bus architectures. Individual branches of the sensor bus network can use two different ways for transferring information:
System designers can choose one of these sensing principles or a combination of both, depending on the application requirements.
Fiber-optic sensor buses are suitable to acquire extended temperature sensing networks. Fibers with optical sensors can be directly embedded into satellite structures like panels. Electrical sensor buses can be used to connect digital temperature transducers which replace conventional passive sensors.
The use of HSB allows platform manufacturers to build a more cost-effective satellite. The modular concept of HSB allows adapting the system to various platforms.
HSB consists of four core modules:
The modular approach allows to configure the HSB System according to the spacecraft needs like the required number of sensors. HSB can be expanded by additional ICMs and/or FIM-AFEs to query more sensors. This is possible due to stackable frames.
Phase 1 of the project included a detailed design definition phase and ended with breadboard models of all subsystems. Phase 2 ends with a complete Engineering Model (EM) of all modules considering the interface requirements for SGEO platforms. To prove the concept an environmental test consisting of a thermal-cycling test and an EMC test was carried out.
The design carried out in Phase 1 resulted in a breadboard assembly which was successfully tested. Component tests and selection for the photonic elements was carried out with success.
The EM development in Phase 2 could be finalized and environmentally tested for performance verification.
The project has been completed.