European Space Agency

IN-ORBIT OPTICAL SHAPE SENSING MEASUREMENTS (ARTES AT 4E.075)

AddToAny

Status

ISSUED

EMITS REFERENCE

Program

CC for Advanced Tech

Price Range

> 500 KEURO

Description

The objective of this activity is to develop and demonstrate in-orbit optical shape sensing as needed for in-orbit structure distortion and antenna distortion detection and monitoring. A sensor breadboard shall be designed and the shape sensing performance testedon a representative hardware under Space environmental conditions.

Targeted Improvements:

Enabling the measurement in real-time ofstructure and antenna distortions in space.

Description:

Currently, there is no technique available to measure the in-orbit mechanical distortion of a spacecraft in operation. Within the satcom market, having an in-orbit shape detecting capability would offer two main improvements:

  1. Improvement of spacecraft pointing performance. Currently, distortion between the attitude control reference(star tracker) and the active antenna causes a beam pointing error. These errors are caused primarily by distortions of the spacecraftand antenna structures. There is also a contributionto this error from the antenna boom and associated mechanisms. Having knowledge of this pointing error will enable compensation techniques. This will lead to improvement of beam pointing accuracy, enabling smaller beams, higher transmission frequencies and thus increased communicationcapacity as requested by operators.
  2. Improvement ofantenna RF performance. Measurement of the thermo-elastic distortion of the active antenna surface would enable an activecompensation system to re-focus and reshape the antenna. A possible solution could be the use of distributed optical fibre sensing. Distributed optical fibre sensing and novel optical fibre geometries, such asmulticore optical fibres, are becoming a disruptive technology allowing the possibility of turning a lightweight optical fibre into a powerful sensorcapable of sensing 1000s of points along its length and determining shape in real time.

In this activity, in-orbit optical shape sensing techniques to enable in-situ distortion measurements of spacecraft structures will be developed andevaluated. A breadboard shall be designed, manufactured and performance tested, in particular to characterise the accuracy in a representativeoperational environment.

Procurement Policy: C(1) = Activity restricted to non-prime contractors (incl. SMEs). For additional information please go to EMITS news "Industrial Policy measures for non-primes, SMEs and RD entities in ESA programmes".

Tender Specifics